6 7
1. Open the botom cover, holding its handle
and turning it counter clockwise - in the
direction of “open”.
2. Remove the filter and plug and discard the
plastic packaging. The plug will be needed in
step 5.
3. Insert the filter with the hollow part facing
towards the air purifier vent.
4. Refasten the botom cover to the air purifier
holding its handle and rotating clockwise -
in the direction of “close” until you hear a
“click”. The cover should snap shut.
5. Plug in the power supply, switch the air
purifier on and of and hold down the ‘power
on’ buton for about 5 seconds. This will
calculate the remaining filter life.
WARNING: Do not use the ClevaPure™ Air Purifier without first removing the plastic
packaging from the filter. The air purifier will not filter air, and may overheat, causing a fire
hazard.
Geting StartedYour ClevaPure™ Air Purifier - Mika
Power on
Body
Bottom cover
Air outlet
Filter
Air inlet