English - 17 -
2.3.1. Creation of the Templates
and press OK. When the OK
Pre-
Save button can be
selected and saved.
2.3.1.1. Add Content to Templates Input Fields
If the area on the template accepts
-
2.4. Export/Import
-
2.5. Switch to Vsign
2.6. Switch to Vsign Lite Portrait Orientation
or
2 from
Media Playback via USB Input
external power supply) external hard disk drives or
USB memory stick to your Display by using the USB
input/s of the Display.
IMPORTANT! Back up the files on your storage
devices before connecting them to the Display.
Manufacturer will not be responsible for any file
damage or data loss. Certain types of USB devices
(e.g. MP3 Players) or USB hard disk drives/memory
sticks may not be compatible with this Display. The
Display supports FAT32 and NTFS disk formatting.
Wait a little while before each plugging and unplugging
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
input/s. External power supplied USB hubs are
recommended in such a case.
Note: When viewing image les the Media Browser menu
can only display 1000 image les stored on the connected
USB device.
Media Browser Menu
photo files stored on a USB storage device by
connecting it to your Display. Connect a USB storage
device to one of the USB inputs located on the rear
side of the Display.
After connecting a USB storage device to your Display
Media Browser menu will be displayed on the screen.
You can access the content of the connected USB
device any time later from the Sources menu. Select
the related USB input option from this menu and press
OKOK
to display or play it back.
You can set your Media Browser preferences by
using the Settings menu. Settings menu can be
accessed via the information bar which is displayed on
the bottom of the screen when pressed the Info button
Info
symbol positioned on the right side of the information
bar and press OK. Picture SettingsSound Settings
Media Browser Settings and Options menus will be
available. The contents of these menus may change
Only Sound Settings menu will be available while
Loop/Shue Mode Operation
Start playback and activate
-
uously played in original order
Start playback and activate
The same file will be played
continuously (repeat)
Start playback and activate
once in random order
Start playback and activate
-
tinuously played in the same
random order.
To use the functions on the information bar highlight
the symbol of the function and press OK. To change
the status of a function highlight the symbol of the
function and press OK as much as needed. If the
deactivated.
USB Auto Play Feature
USB AutoPlay feature is to start playing the media
It uses the Media Browser. The media content types
To Next Page
Loading...
