English - 18 -
for Video content and as last Audio.
This feature will only work if all of the following cir-
cumstances occur:
The USB device is plugged in.
USB Auto Play option is enabled. It is placed in the
Settings>System>More menu.
USB Auto Play Feature with Playlist
Scenario
displayed according to the entered sequence.
Files which to be displayed/played must be written line
volume and standby buttons are used. Other buttons
perform the exit operation.
//**do usb auto play**//
picture.jpg
video.mp4
picture2.jpg
/*picture3.jpg*/
video2.mp4
Scheduler playlist scenario
Source option is set as USB
is started.
Failover Feature
If No Signal option in the Settings>Signage>Controls
menu is set as Failover the Display checks the
period of 5 minutes.
Note: The setting of the USB Auto Play option in the
Settings>System>More menu is not important, in Failover
mode it will function anyway.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
using the remote control of the Display.
The CEC option in the Settings>System>More menu
should be set as EnabledSource
button and select the HDMI input of the connected
CEC device from the Sources List menu. When
in source menu with its own name instead of the
Recorder 1 etc.).
The Display remote is automatically able to perform
the main functions after the connected HDMI source
has been selected. To terminate this operation and
seconds.
You can disable the CEC functionality by setting the
related option under the Settings>System>More
menu accordingly.
The Display supports ARC (Audio Return Channel).
This feature is an audio link meant to replace other
cables between the Display and an audio system (A/V
receiver or speaker system).
other audio outputs automatically. You will need to
decrease Display volume to zero manually if you
wish to hear the ARC audio only (same as optical or
co-axial digital audio outputs). If you want to change
that device from the source list. In that case volume
control keys are directed to connected audio device.
System Audio Control
Display. The volume can be controlled using the remote
control of the Display. To activate this feature set the
Speakers option in the Settings>System>More
menu as . The Display speakers will be
muted and the sound of the watched source will be
provided from the connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.
Usage of the Start URL
of any USB storage device. Make sure that the
To Next Page
Loading...
