English - 20 -
Settings Menu Content
Mode
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: TextGameSportsSignage and Natural.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Energy Saving
This Display is designed to be environmentally friendly. If you set this option to Minimum
MediumMaximum or Auto the Display will reduce energy consumption by regulating
Custom and adjust the Backlight (located under this setting) manually using Left or Right
buttons on the remote. Set as
If pressed Right button while Auto option is selected or Left button while Custom option
Select Proceed and press OK
Display to turn the screen on again.
plug. This will also reduce energy consumption.
Note: Available options may dier depending on the selected Mode.
Backlight
This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving is set to an option other than Custom.
Dynamic
Contrast
You can change the dynamic contrast ratio to desired value.
Noise Reduction
Noise Reduction setting to reduce
the amount of noise.
Colour Temp
Sets the desired colour temperature value. Cool (1300K)Normal (9300K) and Warm
(8500K) options are available.
Picture Zoom
Sets the desired image size format.
Picture Shift
This option may be available depending on the Picture Zoom setting. Highlight and press
OK.
Film Mode
Skin Tone
Skin tone can be changed between -5 and 5.
RGB Gain
adjustment of white balance in the picture.
HDMI Full Range
enhance blackness in the picture.
Reset
Resets the picture settings to factory default settings (except Game mode).
Volume
Adjusts the volume level.
Equalizer
Selects the equalizer mode. Custom settings can be made only when in User mode.
Balance
Adjusts whether the sound comes from the left or right speaker.
Headphone
Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low
Headphone/Lineout
option is set to Headphone.