English - 21 -
Audio Link (Optional)
Press OK to open the Audio Link menu screen. Using this screen you can discover
and connect the sound devices to your Display wirelessly.
AVL (Automatic
Volume Limiting)
If the Dolby Audio menu item is set to an option other than the AVL setting options
will change. AutoNightNormal and options will be available. In Auto mode
the TV will switch to Normal or Night mode automatically according to the current
time information. If no time information is available this option will always function as
Normal. When the TV switches to Night
as Auto
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Headphone/Lineout
can select this option as Lineout
set this option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout
could damage your hearing. A warning message will be displayed on the screen when
switched to Lineout option. Remove your headphone and press OK to continue.
Dynamic Bass
Enables or disables the Dynamic Bass.
Dolby Audio
SmartMovieMusicNews and options will be available. Set as to disable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than O.
Surround Sound
Surround sound mode can be changed as On or .
Digital Out
Sets digital out audio type. PCM and Compressed options are available.
Disable the network connection or change the connection type.
Scan Wireless
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
Press WPS on your
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed
Advanced Settings
Enable or disable this feature by setting it as On or .
Note: For detailed information on the options of this menu refer to the Connectivity section.
Signage Menu Content
Device Info
Set ID
Sets the device ID. You can select a value between 0-99 using the numeric buttons
on the remote in order to identify your Display.
Software
upgrade
Displays current software version. Press OK to see the upgrade options. You can use
these options to start a manual search for software updates and set your automatic
scan preference.
Displays serial number of the unit. (Cannot changed by user)
Model name
Displays model name of the unit. (Cannot changed by user)
Save model
Copies the model information data of the unit to a connected USB device.
Display Life Time
Displays the duration of life of the unit.
To Next Page
Loading...
