English - 35 -
GETDAPAVL
Get DAP (Dolby Audio
Processing) AVL state.
no parameter
#*DAP (Dolby Audio Processing
Availability) is inactive
or
#*DAP (Dolby Audio Processing
or
#*DAP (Dolby Audio Processing)
state is ...
SETDYNAMICBASS Set dynamic bass state. #*set dynamic bass state to n
GETDYNAMICBASS Get dynamic bass state. no parameter
#*the dynamic bass state is ...
SETBASSGAIN Set bass gain integer n (-6 <= n <= 6)
#*set bass gain to n
or
#*Incorrect sound system
parameter entered
GETBASSGAIN Get bass gain no parameter
#*the bass gain level is n
Note: Above n is -6 <= n <= 6
SETSURROUNDSOUND
Set surround sound
state.
#*set surround sound state to n
SETEQUSERFREQ
Set equalizer user freq.
value for any band.
integer n -13 < n < 13
Example:
SETEQUSERFREQ 120Hz
10
#*setEQUserFreq() set to n
or
#*Invalid parameter entered
or
#*Incorrect equalizer mode. It
should be USER mode
GETEQUSERFREQ
Get equalizer user freq.
#*the equalizer value for the
band is n
or
#*Invalid parameter entered
Note: Above n is -13 < n < 13
GETDIGITALOUT Get digital out. no parameter
#*digital out is pcm
or
#*digital out is compressed
SETSOUNDSYSTEM Set sound system.
#*setSoundSystem() to n
or
#*Incorrect sound system
parameter entered
SETEQMODE Set equalizer mode.
#*setEQMode() set to n
or
#*Incorrect equalizer parameter
entered
GETEQMODE Get equalizer mode no parameter
#*the equalizer mode is n
User
SETDIGITALOUT Set digital out.
#*setDigitalOut() set to n
or
#*Incorrect digital out mode
parameter entered
HARDOFHEARING Set hard of hearing state. #*set hardofhearing state to n
AUDIODESC
Set audio description
state.
#*set audio description state to n
VOLUMEUP
Inrease Volume Level by
1 step
(Until max volume)
no parameter
#*volume LEVEL is increased
to ...
or
#*Volume level is at max value.
You can not increase volume
volume level is ...
To Next Page
Loading...
