English - 55 -
AUTOSETSIGNAGEID
Sets signage id
automatically.
For usage the
feature the
AdvancedVideoWall
enable.
no parameter
#*
OR
is disabled.
C2CONNECTION
Returns the
handshake result
between G6F and C2
devices
no parameter
availability (process still not
OR
available)
OR
(handshake is succeded)
UART_CHECK
Starts the handshake
process between G6F
and C2 devices
no parameter #*C2 handshake process is started
GETTEMPERATURE
Measure ambient
temperature using
temperature sensor
no parameter
#*TEM=...
OR
#*Temperature sensor is not
available
GETHUMIDITY
Measure relative
humidity using
humidity sensor
no parameter
#*HUM=...
OR
#*Humidity sensor is not available
SETVIDEOCROP
Crop input video with
given parameters and
show full screen.
Wideowall must
be disabled or cell
number must be zero
to activate this feature.
Set width or height as
0 to disable crop.
string (X-Y-W-H)
GETVIDEOCROP Get crop parameters no parameter
LEN
LED Bar PWM
Enable/Disable of the
given color
#*SUCCESS
#*FAILURE
LPE
LED Bar PWM Period
value of the given
color
65535)
#*SUCCESS
#*FAILURE
LDC
LED Bar PWM Duty
Cycle value of the
given color
65535)
#*SUCCESS
#*FAILURE
LDI
LED Bar PWM
Division value of the
given color
65535)
#*SUCCESS
#*FAILURE
LBE
LED Bar Enable/
Disable via GPIO
#*SUCCESS
To Next Page
Loading...
