Preface
VIII
Preface
Related Documents
You may also need to consult the following manual for additional information:
User’s Manual on CD/DVD
This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro-
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the computer
(e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the left of the
computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter.
6. Use one hand to raise the
lid/LCD to a comfortable viewing angle
(do not exceed 180 degrees - or 130 degrees if the system is
docked to the docking station or has a 9 cell battery inserted)
;
use the other hand (as illustrated in Figure 1) to support the base of
the computer (Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer “on”.
Shut Down
Note that you should al-
ways shut your com-
puter down by
choosing the Shut
Down command from
the bottom right of the
Start menu in Win-
dows. This will help
prevent hard disk or
system problems.
130º
130º
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
To Next Page
Loading...
