Preface
IX
Preface
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in
position.
4. Attach the AC/DC adapter to the DC-In jack on
the left of the computer, then plug the AC
power cord into an outlet, and connect the AC
power cord to the AC/DC adapter.
5. Use one hand to raise the
lid/LCD to a
comfortable viewing angle
(do not exceed 120
degrees)
;
use the other hand (as illustrated in
<Hyperlink B n I>Figure 1) to support the base
of the computer (Note: Never lift the computer
by the lid/LCD).
6. Press the power button to turn the computer
“on”.
Figure 1
Opening the Lid/LCD/Computer with
AC/DC Adapter Plugged-In
www.Teknisi-Indonesia.com
To Next Page
Loading...
Need help?
General
