Clevo W210CUQ User Manual

Disassembly
Removing the Keyboard 2 - 9
2.Disassembly
Removing the Keyboard
1. Turn off the computer and remove the battery (page 2 - 5).
2. Use only the small tool
provided (see picture below) to carefully press the four keyboard latches - at the
top of the keyboard to elevate the keyboard from its normal position (Figure 5a).
3. Carefully lift the keyboard
up, being careful not to bend the keyboard ribbon cable (Figure 5b).
4. Disconnect the keyboard ribbon cable from the locking collar socket
(Figure 5b)
5. Carefully lift up the keyboard
(Figure 5c) off the computer.
A
1
4
5
6
6
7
Figure 5
Keyboard Removal
a. Press the four latches to
release the keyboard.
b. Lift the keyboard up and
disconnect the cable from
the locking collar.
c. Remove the keyboard.
5
a.
b.
2 3 41
7
5
5
c.
6
d.
Keyboard Tabs
A
Tool for pressing
the keyboard
latches.

1. Battery
6. Keyboard

5. Keyboard

Re-Inserting the Key-
board
When re-inserting the
keyboard, align first
the three keyboard
tabs
(Figure 5d) that
are located at the bot-
tom, to the slots in the
case.
www.Teknisi-Indonesia.com

Clevo W210CUQ Specifications

General

Brand	Clevo
Model	W210CUQ
Category	Laptop
Language	English