Modules & Options
6 - 12 SATA Mode Setup (Optane™, RAID or AHCI)
6
4. Select “Save and Exit”.
5. As the computer restarts press <F2> to enter the BIOS again.
6. Go to the Setup Utility, and go to the Advanced menu and you will now see the
Intel(R) Rapid Storage Technology item. You can press <Enter> to check the
information.
(Note this item only appears after you have restarted and accessed the BIOS
again after having set SATA Mode to Intel RST Premium With Intel Optane
Acceleration)
7. Select “Save and Exit”, and make sure the Windows 10 OS DVD is in the DVD
drive, or on a USB flash drive, as the computer starts up it will automatically boot
from the Windows 10 DVD or flash drive.
8. Press <F2> as the computer starts up and select Boot Manager.
9. Click to select the drive containing the Windows 10 OS.
Figure 6 - 6
Inte(R) Rapid
Storage Technology
To Next Page
Loading...
