6
Size1, size2 - lifting holes
insert safety pins (1) and split pins (2)
Size3....size6
lifting bracket
Work respecting the current safety standards.
For detailed information (dimensions, weights, technical features,
etc.) refer to the TECHNICAL INFORMATION chapter.
To perform the operations use the protective equipment:
gloves, goggles, etc.
Before accepting delivery, check:
The unit has not been damaged during tran sport. That the
delivered material corresponds to that indicated on the transport
document, comparing data with the matriculation plate positioned
on the pack.
In case of damages or anomalies:
immediately make a note of the found damage on the
transport document and write the wording: "Collection
with reserve for evident shortages/damages due to
transport".
notices via fax and with registered letter with
acknowledgement receipt to carrier and supplier.
The notifications must be made within 8 days from receipt, after
this date they will not be accepted.
2.1 Preliminary information
2.2 Check upon arrival
Respect the indications on the outside of the pack.
2.3 Storage
2 - RECEIPT
Check the weight of the unit (TECHNICAL INFORMATION
chapter) and capacity of the lifting mean.
Identify the critical points in the handling path (holy paths,
ramps, steps, doors).
Check the position of the centre of gravity in the TECHNICAL
INFORMATIONS—DIMENSIONS section.
Ensure the unit is stably balanced before starting handling.
2.5 Handling
Use protections to avoid damaging the unit.
Attention not to damage the unit.
Recycle and dispose of the packaging material according to
local standards.
2.4 Removal of packaging
To Next Page
Loading...
Need help?
General
