02
2 A GLANCE OF THE USER INTERFACE
2.1 The appearance of the wired controller
2.2 Status Icons
Enter the menu
structure from
the home page
Enable or disable
the heat mode, or
enable or disable
DHW mode in the
menu
Press and hold to
unlock/lock the
controller
Return to the
previous level
Holiday mode has been enabled
The disinfection mode
has been enabled
The ODU is being
defrosted
The hydro module is
in a centralized
control state
The weekly timer
has been enabled
The timer has been
enabled beenenabled
Locking button of the
wired controller
Fault and protection
The compressor has
been started
Silent mode has been
enabled
Room temperature
control
Leaving water
temperature control
Free electrical signal
Valley electrical signal
Go to the next step when programming a
schedule in the menu / confirm a
selection/enter a submenu in the menu
Navigate the
cursor on the
display/navigate
in the menu
structure/adjust
the settings
04:27 sun
MAIN
DHW
SET
TANK
ON ON
45 45
04:27
MAIN
ROOM
Preset temp. is unchanged
Preset temp. decreases
Preset temp. increases
27-05-2019
The anti-freezing
protection function
has been enabled
°C °C
The heat recovery
function has been
enabled
To Next Page
Loading...
Need help?
General
