CLIVET HWM-2-XMi 140 User Manual

20
6.4.1 SILENT MODE
6.4 OPTIONS
OPTIONS menu contents as follows:
1) SILENT MODE
2) HOLIDAY AWAY
3) HOLIDAY HOME
The silent mode is used to reduce the noise of the hydro module, which may degrade the capability of the hydro module. You
can set the hydro module to always operate in silent mode or to enter silent mode within a period of time.
On the main interface, you can check whether silent mode is enabled. If it is, the icon will be displayed on the main interface.
Choose MENU > OPTIONS > SILENT MODE. Press OK. The following interface is displayed.
OPTIONS
CURRENT STATE
TIMER
SCROLL
OFF
ENTER
HOLIDAY
HOME
HOLIDAY
AWAY
SILENT
MODE
OPTIONS
TIMER
SCROLL
OFF
ENTER
HOLIDAY
HOME
HOLIDAY
AWAY
SILENT
MODE
CURRENT STATE
ON/OFF
ON/OFF
OPTIONS
CURRENT STATE
TIMER
SCROLL
OFF
ENTER
HOLIDAY
HOME
HOLIDAY
AWAY
SILENT
MODE
OPTIONS
SCROLL
HOLIDAY
HOME
HOLIDAY
AWAY
SILENT
MODE
Choose ON/OFF to determine whether the silent mode is enabled. If CURRENT STATE=OFF, silent mode is invalid. If
CURRENT STATE=ON, silent mode is valid. On the TIMER page, you can set the time for enabling the silent mode. Two periods
of time can be set. The silent mode will be started at the START time, and disabled at the END time. If TIMER is not set, the
hydro module will remain in silent mode.
No. START END
00:00
1
00:00
2
00:00
00:00
M0WU00002-00

CLIVET HWM-2-XMi 140 Specifications

General

Brand	CLIVET
Model	HWM-2-XMi 140
Category	Control Unit
Language	English