CLIVET HWM-2-XMi 140 User Manual

06
Scenario 5
Only heat mode is available and there are multiple set points for the heat mode. (For more information, please read the
Installation Manual and see ''Multiple Set Points'' on Page 14 in this document.)
The settings of multiple set points do not affect the main interface. The temperature of multiple set points is set through the
menu of the wired controller, while only the space 0 room temperature is set on the main interface.
Note: The temperature of multiple set point 2 is lower than the temperature of multiple set point 1 and the temperature of multiple
set point 1 is lower than the temperature set on the main interface.
FCU
5
6
9 10
11
FHL
12
8
4
radiator
1
2
3
6
7
9
04:27 sun
MAIN
SET
ON
45
°C
27-05-2019
Sets the desired temperature
of the main set point.
MAIN: Leaving water
temperature control
ROOM: Room temperature
control
M0WU00002-00

CLIVET HWM-2-XMi 140 Specifications

General

Brand	CLIVET
Model	HWM-2-XMi 140
Category	Control Unit
Language	English