CLIVET WSAR-MT-E User Manual

45
Repeated reset can cause irreversibile damages as
malfunctioning of the system itself.
In case of doubt please contact an Assistance Centre.
7 - REGULATION
1
IMMEDIATE ACCESS (only if alarms are present)
2
3
1
2
ALARMS (accessible only after having entered the password INSTALLER)
3 4
ALARMS RESET (accessible only after having entered the password INSTALLER)
3
4
1
2
Status ECO
Setpoint 19.0 100 %
T In 17.0
T Out 26.0
Fri. 17/10/08 18:02
Press
Main Menu
System controls
System modalities
Stata
Alarms
Select ALARMS and confirm.
Alarm Menu
Active alarms
Alarm log
Log reset
Alarm reset
Active alarms
XXXXX
Alarm description
Hour XXXX
Date XXXX
Select and confirm:
- Active alarms;
- Alarm log;
- Active alarm reset;
- Log reset of all alarms.
Alarm visualization.
If no alarms are present.
Press Home to go back to the
normal visualization.
Zero alarms
↵ OK
Alarm Menu
Active alarms
Alarm log
Log reset
Alarm reset
Status ECO
Setpoint 19.0 100 %
T In 17.0
T Out 26.0
Fri. 17/10/08 18:02
Press. Select ACTIVE ALARMS and
confirm.
Active alarms
E03
Out. Temp. probe
Hour 12:45
Date 08/08/09
Alarm visualization.
Press previous menu
and select Alarm reset
Alarm Menu
Active alarms
Alarm log
Log reset
Alarm reset
Select ALARM RESET and
confirm.
Alarm Menu
Active alarms
Alarm log
Log reset
Alarm reset
Do you confirm reset?
↵ OK
Confirm to reset.
Press Home to go back to the
normal visualization.
Status ECO
Setpoint 19.0 100 %
T In 17.0
T Out 26.0
Fri. 17/10/08 18:02
Main Menu
System controls
System modalities
Alarms
Configurations
Press.
Before resetting an
alarm identify and
remove the cause that
generate it
Select ALARMS.

CLIVET WSAR-MT-E Specifications

General

Brand	CLIVET
Model	WSAR-MT-E
Category	Heat Pump
Language	English