CLIVET WSAR-MT-E User Manual

49
7 - REGULATION
UNIT CONFIGURATION (accessible by the user)
3
4
1
2
ID Descrizione
Extended description
10 MantCoolEn
Enable summer maintenance 1=Yes/0=No
11 MantHeatEn
Enable winter maintenance 1=Yes/0=No
21 RemMode
Set remote inputs 0=H/C or H/DHW only or C/ DHW only from ID, 1=digital input no effect
28 EnAntiRug
Enable anti-dew compensation 1=Yes/0=No
43 SetCool
Summer Set Point
44 SetHeat
Winter Set Point
45 SecondSetC
Secondary summer SetPoint
46 SecondSetH
Secondary winter SetPoint
220 SetMantCool
Summer maintenance Set Point
221 SetMantHeat
Winter maintenance Set Point
364 SetH2OSanitaria
DHW Set Point
451 SetHeater
Antifreeze resistance Set Point
454 AlFreeze
Antifreeze alarm
458 PreAF
Deactivation threshold of Pre antifreeze steps
460 SetfreezeExt
Temperature threshold for Coil freeze Alarm activation
461 SetHeaterExt
Temperature threshold for antifreeze resistance activation
539 IstTamb
Ambient temperature hysteresis
The list includes the parameters accessibile to the user, according to the unit configuration some parameters are visible and some not.
USER PARAMETER LIST
Select the parameter to
modify and confirm.
Enter the value and confirm.
Press Home to go back to the
normal visualization.
Press. Select CONFIGURATION and
confirm.
Status ECO
Setpoint 19.0 100 %
T In 17.0
T Out 26.0
Fri. 17/10/08 18:02
Main Menu
System modalities
Configuration
Scheduling
Date and hour
User parameters
Id 10 MantCoolEn
Enable maintenance Cool
Min 0 Max 1
Value 0
User parameters
Id 10
Enable
Min
Value 0
Min 0
Max 1
0

CLIVET WSAR-MT-E Specifications

General

Brand	CLIVET
Model	WSAR-MT-E
Category	Heat Pump
Language	English