MAN.234 Rev.3 ENG - Use and maintenance manual S19HD PRO page
15
of
83
Picture 7: start/link button on radio control.
2. if the radio control is not correctly connected to the machine, the
green led on the upper right side of the LED panel flashes intermit-
tently and a buzzer on the electric box emits an intermittent acous-
tic signal.
3. press the start/link button again: when the connection is complete,
the buzzer stops and the green led starts to light up at the rate of
two flashes interspersed with a pause.
SL
CK
To Next Page
Loading...
