CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
WARNING:
Injuries by falling materials!
During operation chips, tools (or parts of it) could be thrown out uncontrollably or
cause severe injuries to skin and eyes.
• Wear face shield or fully closed and tight-fitting goggles, protective
clothing, protective gloves and safety shoes.
• If particles enter your eyes, immediately get medical attention!
Unexpected start-up of the machine
WARNING:
Risk of injury caused by unexpected start-up of the machine
The machine and the used tools can start-up unexpectedly, change their direction or
stop. Limps can get trapped.
• It must be ensured that, no body parts get in the danger zone of the machine.
• Protect working area against unintentional access.
ATTENTION:
Risk of injuries by negligent handling of tools!
By handling tools negligent, lacerations and crushing injuries can be caused.
• Tools must be handled with care and used in accordance with the
regulations.
• Take weight into account when transporting tools.
• Wear safety shoes and protective gloves.
ATTENTION:
Risk of injuries by sharp edges and corners!
Sharp edges and corners can cause abrasions and cuts on your skin.
• Working near sharp edges and corners should be done with great caution.
• If in doubt wear protective gloves.
To Next Page
Loading...
