CNC-Step High-Z T-Series - General; Symbol Description

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 7
Support: +49 (0)2831/91021-50
15.02.2014
1 General
This instruction provides guidelines which enable a safe and efficient handling of the machine. The
manual is an integral part of the machine and must be kept in the immediate vicinity of the machine
and accessible at any time for the personnel.
Before starting all tasks, personnel must carefully read and understand these instructions.
Adherence to all the specified safety instructions and instructions for actions in this operating
manual is a fundamental requirement for working safely.
Furthermore, the local accident prevention regulations and general safety conditions for the
application of the machine are also applicable.
Illustrations in this manual are intended to facilitate basic understanding, and may differ from the
actual design.
Further guidelines regarding built-in components are found in the appendix of this description.
1.1 Symbol description
Safety instructions are designated by symbols. In addition, there is always a signal word
heading the information indicating the severity of the danger or hazard that may be
encountered.
HINT:
Indicates a potentially hazardous situation which, if not avoided, could result in
property damage or environmental contamination.
WARNING:
This signal word and symbol indicates a risk which can lead to severe injury or even
death, if not avoided.
ATTENTION:
This signal word and symbol indicates a risk which can lead to small injuries, if not
avoided.
Danger:
This signal word and symbol indicates a risk which can lead to severe injury or even
death, if not avoided.
Prohibition for people with pacemakers
This sign stands for activities involving risks for people with pacemakers. These areas
are prohibited for people with pacemakers!!