CNC-Step High-Z T-Series - Power Values; Operating Conditions; Working Materials; Emissions

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 30
Support: +49 (0)2831/91021-50
15.02.2014
3.2 Power values
Feed drives X / Y / Z
specification
value
unit
Power consumption per motor max.
4,2
A
3.3 Operating conditions
Environment
Specifications
value
unit
temperature range
15-30
°C
Relative humidity maximum
60
%
Duration
Specification
value
unit
Maximum operating time per session
100
h
Pause until the next session
2
h
3.4 Working materials
Working materials
Type
Low friction grease
multipurpose grease
Acid and resin free
Low friction oil
Fine mechanics oil
Acid and resin free
3.5 Emissions
Specification
Value
Unit
Noise emissions
ca. 50
dB(A)