CNC-Step High-Z T-Series - Lubricate Machine

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 64
Support: +49 (0)2831/91021-50
15.02.2014
8.4.2 Lubri cate ma chin e
The lubricants reduce wear, protect against pollution, reduce corrosion and prolong the service life
by their properties.
For supplies, see chapter 3.5.
Grease Trapezoidal Thread Spindle
Personnel:
• Qualified personnel
Safety equipment:
• protective clothing
• Safety shoes
• Chemical-resistant gloves
Fig. 26: Lid Y-axis
1
2
Switch off the machine and secure against re-start.
Grease Trapezoidal spindle Z-axis (Fig. 27/1) with a low-
friction grease applied on a cleaning cloth DIN 61650 or
alternatively apply the grease with a suitable brush.
ATTENTION:
Risk of health damage by contact with oil and grease!
Contact with oil and fat can lead to health damage.
• Avoid skin contact.
• Remove Oil and grease immediately from the skin.
• Do not inhale vapours.
1