CNC-Step High-Z T-Series - Problem Resolution; Cancel the Emergency Stop; Check Axes for Perpendicularity

Operating Instructions
High-Z T-Series
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 74
Support: +49 (0)2831/91021-50
15.02.2014
9.3 Problem resolution
9.3.1 Canc el the e me r g ency s top
Personnel:
• Operator
Fig. 34: Emergency stop button
1 Determine and remedy the fault cause.
2 Unlock the emergency stop button by turning
(Fig. 34) twice.
9.3.2 Che c k axes f o r p erpendi culari t y
Personnel:
• Qualified personnel
Safety equipment:
• protective clothing
• Safety shoes
1
Check the Y-axis to the X axis on squareness, where necessary, re-align using the operation
description for aligning the machine regarding perpendicularity (see chapter 9.3.3)
5
Start reference run with zero-point approach; see separate instructions of the software.