GRMON3-UM
June 2019, Version 3.1.0
119 www.cobham.com/gaisler
28. edcl - syntax
NAME
edcl - Print or set the EDCL ip
SYNOPSIS
edcl ?ip? ?greth#?
DESCRIPTION
edcl ?ip? ?greth#?
If an ip-address is supplied then it will be set, otherwise the command will print the current EDCL ip. The
EDCL will be disabled if the ip-address is set to zero and enabled if set to a normal address. If more than
one device exists in the system, the dev# can be used to select device, default is dev0.
RETURN VALUE
Command edcl has no return value.
EXAMPLE
Set ip-address 192.168.0.123
grmon3> edcl 192.168.0.123
SEE ALSO
Section 6.4, “Ethernet controller”
To Next Page
Loading...