GRMON3-UM
June 2019, Version 3.1.0
138 www.cobham.com/gaisler
44. gui - syntax
NAME
gui - Control the graphical user interface
SYNOPSIS
gui
gui status
DESCRIPTION
gui
When GRMON has been started in CLI mode this command can be used to start the graphical user interface.
This command has not effect if the GUI has already been started.
gui status
Print status for the GUI connection.
RETURN VALUE
Only the command 'gui status' has a return value. Upon successful completion gui status returns a tuple, where
the first value represents the status (0 stopped, 1 started) and the second value is a reserved number.
SEE ALSO
Chapter 4, Graphical user interface
Section 4.2, “Starting GRMON GUI”
To Next Page
Loading...