GRMON3-UM
June 2019, Version 3.1.0
175 www.cobham.com/gaisler
72. phyaddr - syntax
NAME
phyaddr - Set the default PHY address
SYNOPSIS
phyaddr adress ?greth#?
DESCRIPTION
phyaddr adress ?greth#?
Set the default PHY address to address. If more than one device exists in the system, the greth# can
be used to select device, default is greth0.
EXAMPLE
Set PHY address to 1
grmon3> phyaddr 1
SEE ALSO
Section 6.4, “Ethernet controller”
To Next Page
Loading...