Chapter 2: Operation
20 Make a telex call
Options in the telex page
Buttons
The table below shows the functions of the buttons that can appear at the
bottom of the page:
Button Function
Transmits the text you have typed in the text line at the
bottom.
(ARQ only) Changes direction, so the recipient can write
back. You cannot send any text after an Over command,
until the direction is changed back to your side.
However, if you send more text while the OVER
command is waiting to be sent, the OVER is removed and
replaced by your new text.
Transmits your answer back string.
The answer back string is stored in the MF/HF radio
during installation, using the Identification window in
the Message Terminal (System > Settings >
Identification).
In Call settings you can set up the system to
automatically send DE/WRU (S
ystem > Settings > Call
settings).
To Next Page
Loading...
Need help?
General
