Need help?Do you have a question about the Cobod BOD2-444 and is the answer not in the manual?
General| Print Speed | Up to 1000 mm/s |
|---|---|
| Print Technology | Concrete 3D Printing |
| Materials | Concrete |
| Layer Height | 5 mm to 20 mm |
| Nozzle Diameter | 10 mm to 50 mm |
| Control System | Proprietary software |
| Power Requirements | 400V, 3-phase |
| Dimensions | Varies with configuration |
Overview of the BOD2 printer's function, modularity, and operational principles.
Details the physical components and structure of the BOD2 printer, including columns, axes, and print head.
Explains the automated extrusion process of concrete materials in layers using the machine.
Defines the correct operating conditions and adherence to manual for the BOD2 printer.
Lists actions considered improper use and the manufacturer's disclaimer for resulting damages.
Specifies checks and personnel training required before the machine can be commissioned.
Covers essential safety information, including warning signs and protective measures.
Detailed steps for installing and assembling the BOD2 printer, covering mechanical and electrical aspects.
Describes how to operate the machine safely and appropriately in various environments.
Details tasks to be performed by the operator, including safety and documentation recommendations.
Procedure for testing all emergency stop buttons, including expected behavior and warnings.
Steps to test the safety door functionality, including speed changes and lock behavior.
To Next Page