3.3.1 Home
You can navigate easily and quickly from a previous journey or destination to your home, by personalising Snooper so that a route
can be calculated by pressing just a few buttons.
3.3.2 Setting the ‘Home’ Destination
Press the centre of the display to enter the ‘Navigate to’ menu.
Press the ‘Home’ icon.
The first time the ‘Home’ function is used an information screen is
displayed saying ‘Set Home? Press ‘OK’ in the information window
to continue, press ‘CANCEL’ to exit. If ‘Home’ has already been set it
can be edited in My Favourites – refer to section 4.4 on page 52
.
You can search for your address by using one of the following options:
‘Find address by city’ or ‘Find address by post code’. Please refer to 3.1 and 3.2 above on how to use these functions.
Once you have entered the ‘Home’ destination, a new field is available for you to ‘Name’ the destination.
Press ‘Name’ and a keyboard will be displayed with the road name you selected.
Press the ‘Arrow’ key to erase this data then input the new name using the keyboard.
Please note: You can enter a new name for the home destination using up to a maximum of sixteen characters.
Press ‘Save’ once you have entered the name.
Once your home address has been saved, Snooper will be able to calculate a route to this address.
3.3.3 Using the ‘Home’ Function
To calculate a route:
Press the centre of the display to enter the ‘Navigate to’ menu.
Press the ‘Home’ icon.
Snooper will display details of the destination and offer a ‘Go’ button and a ‘Route Option’ button. Press ‘Go’ to begin your journey.
To Next Page
Loading...
Need help?
General
