Other routing options are:
6.2 Navigate Avoiding Road
Please note: This option can only be used once a route has been calculated. If a route has not been calculated then this is
indicated by the button being greyed out.
6.2.1 Avoid by Road Name
If you know the road name or road number you wish to avoid, then select
this option.
Press ‘Avoid by Road Name’.
You will be provided with the turn by turn instructions of the route that you
are currently following. If the road you are looking for is not visible, press the
down arrow on the right hand side of the display to see further turn by turn
instructions.
Once you have found the road that you wish to avoid, select it with your finger.
Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be
taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.
The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to provide
you with turn-by-turn instructions.
6.2.2 Avoid by Range
If you wish to avoid several roads from the selected route calculated by
Snooper, then this function allows you to re-calculate a route over a user
defined distance, ranging from 1 mile up to a maximum of 100 miles.
To use this function:
Press the ‘Avoid by range’ button - the ‘Select avoided range’ page will
be displayed.
Select the distance of the range you wish to avoid.
If you wish to view more range distances then press the down arrow on the
right hand side of the display. Once you have selected the range you wish to
avoid, Snooper will automatically re-calculate your route.
Once the calculation is complete you can either press ‘Go’ to start navigation, ‘Simulation’ to see the actual route that will be
taken, ‘Route Option’ to change the parameters of the route or ‘Guide’ which will list the turn by turn instructions of the journey.
The ‘Summary Screen’ will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.
6.2.3 Avoid by TMC
Choosing this option will avoid TMC incidents or delays - refer to page 69 for further details.
To Next Page
Loading...
Need help?
General
