3.13 Find by coordinate
To navigate to a location using a coordinate:
Press the centre of the screen to access the ‘Navigate to’ menu.
Press the black arrow
once.
Press the ‘Find by coordinate’ icon.
Enter the coordinate using the key pad and press the ‘OK’ button.
You can enter the coordinate in three different formats. For example.
Decimal Degrees (DD.ddddd°)
Latitude (N): 53.34878°
Longitude (W): -2.68214°
Please note: when inputting the Longitude you ignore the minus symbol (-) . The degree symbol
MUST be used in order for this function to work (see image on the right).
Degrees, Minutes, Seconds (DD°MM’SS.s”)
Latitude (N): 53°20’55.6”N
Longitude (W): 2°40’55.71”W
Please note: when inputting the Longitude and Latitude you ignore the letters ‘N’ and ‘W’ . You
MUST use the degrees, minutes and seconds symbols when using this function (see image on
the right).
Degrees, Minutes (DD°MM.mmm’)
Latitude (N): N 53 20.927
Longitude (W): W 2 40.928
Please note: when inputting the Longitude and Latitude you ignore the letters ‘N’ and ‘W’. The
degree and minute symbols MUST be used when using this function (see image on the right).
After pressing OK, the location of the coordinates will be shown on the map. If correct
press ‘Quick menu’ and then ‘Continue’ and follow the on screen instructions to calculate
a route.
Easting and northing are geographic Cartesian coordinates. Press the EN button to enter Easting and Northing co-ordinates
To Next Page
Loading...
Need help?
General
