Quick Start Guide to Navigation
1. Take the Snooper outside so that the GPS receiver can locate
your position. This may take between 15 - 30 minutes the
first time. When satellite lock is achieved, the screen will
display your current position on its map in a ‘3D’ navigation
view. Your position (and direction) is indicated by the
icon.
Tip: To reduce the ‘cold start’ GPS time remain stationary.
2. Bring up the main navigation menu by touching the centre
of the display.
Select
Find by Post Code
Tip: This indicates that there are more options on
the next screen (currently there are three screens in
total).
3. You will see a standard browser screen, used for entering
postcodes. Enter the full UK postcode using the keyboard
and press
Destination address:
1
2 3
To Next Page
Loading...