5.3 Brightness Control
Snooper brightness can be adjusted using this function within the ‘Configure’ menu. To adjust the volume:
Press the centre of the screen to enter the ‘Navigate to’ menu.
Press ‘Configure’.
Press the ‘Brightness Control’ icon.
There are 3 settings: Auto, Day and Night.
Auto brightness
If ‘Auto’ is selected the device will automatically switch between the Day and
Night brightness setting. The time the device switches is pre determined and
can not be adjusted. This is the default setting.
Day
If you select ‘Day’ you can adjust the day time brightness of the LCD screen.
To adjust the daytime brightness:
Press ’Day’.
Adjust the screen brightness using the
and buttons.
To save the setting press OK.
Night
If you select ‘Night ‘ you can adjust the night time brightness of the LCD screen.
To adjust the night brightness:
Press ’ Night’.
Adjust the screen brightness using the
and buttons.
To save the setting press OK.
Once you have adjusted both ‘Day’ and ‘Night’ brightness you should select ‘Auto’ then OK to save the setting.
If Auto is not selected then the screen will not switch between day and night automatically.
Day view
Night view will change both
the screen brightness and the
map colours.
To Next Page
Loading...
Need help?
General
