3.4 Office
You can navigate easily and quickly from a previous journey or destination to your office or place of work, by personalising Snooper
so that a route can be calculated by pressing just a few buttons.
3.4.1 Setting the ‘Office’ Destination
Press the centre of the display to enter the ‘Navigate to’ menu.
Press the ‘Office’ icon.
The first time the ‘Office’ function is used an information screen is
displayed saying ‘Set Office? Press ‘OK’ in the information window
to continue, press ‘CANCEL’ to exit. If ‘Office’ has already been set it
can be edited in My Favourites – refer to section 4.5 on page 53.
You can search for your address by using one of the following
options:
‘Find address by city’ or ‘Find address by post code’. Please refer to 3.1 and 3.2 above on how to use these functions.
Once you have entered the ‘Office’ destination, a new field is available for you to ‘Name’ the destination.
Press ‘Name’ and a keyboard will be displayed with the road name you selected.
Press the ‘Ar row’ key to erase this data then input the new name using the keyboard.
Please note: You can enter a new name for the office destination using up to a maximum of sixteen characters.
Press ‘Save’ once you have entered the name.
Once your office address has been saved, Snooper will be able to calculate a route to this address.
3.4.2 Using the ‘Office’ Function
To calculate a route:
Press the centre of the display to enter the ‘Navigate to’ menu.
Press the ‘Office’ icon.
Snooper will display details of the destination and offer a ‘Go’ button and a ‘Route Option’ button. Press ‘Go’ to begin your
journey.
3.5 Recent Route or Clear route
Snooper automatically stores the last route that has been calculated, so that if you wish to return to that address you do not have to
re-input all the details again.
To use this function:
Press the centre of the screen to enter the ‘Navigate to’ menu.
Press the ‘Recent Route’ icon.
Snooper will now calculate the route to your selected location.
To Next Page
Loading...
Need help?
General
