To play the Program List:
Make sure that Edit Mode is set to “Off”.
Select a le in the Program List and press to start playback. The les in
the Program List will be played in sequence automatically.
To add more les to the Program List:
When the frame is in Program View, select and conrm “Browser View”.
Repeat Steps 1 to 4 to add les to the Program List.
To remove les from the Program List:
Make sure that Edit Mode is set to “Off” and that the frame is in “Program
View”.
Select les from the Program List and press to mark them with a check.
Select “Clear Program” to remove the marked les.
Card Selection Menu
If multiple memory cards have been loaded, use the
Card Selection menu to view les on a different card.
From the Play Menu screen, press until the
Card Selection menu appears.
Press or to select a card and then press
to conrm. The photo frame will load the contents
of the card and display the Play Menu screen.
MS and SD cards cannot be installed for use at the same time.
•
•
•
•
•
•
•
•
Playing Your Files
To Next Page
Loading...
Need help?
General
