Chapter 6: Annual Cleaning
Classified ā Confidential Page 38 of 46
Continue to hold the line up and select the HIGH FLOW TEST button. Wait for the flow
from the Nozzle to stop.
Repeat Step 3 10 times. This purges the Sanitizer from the HFCS line.
Remove the Flush Adapter and connect a BiB of HFCS to the green BiB Connector.
Select the HIGH FLOW TEST button. Wait for the flow from the nozzle to stop.
Repeat Step 6 10 times. This primes the HFCS.
Return the dispenser to the normal consumer dispensing screen.
X. Clean Remaining Parts and Surfaces
Perform all the steps describe in Chapter 3: Daily Cleaning.