6.1.9 Advanced
Reset: Reset all settings to factory default.
NOTE: time and language will not be reset.
Import/Export: Export the parameters of your device onto a removable storage device.
1. Insert a USB ash drive up to 32GB into the rear of the DVR
2. Select the ‘Import’ or ‘Export’ button to import or export your DVR settings
6.2 Main Menu - Search
To access the ‘Search’ settings, select ‘Search’ from the Main Menu. Choose the tabs at the top to
switch between sub-menus. The ‘Search’ menu provides access to playback recordings and backup
to ash drive.
NOTE: The DVR may take some time to retrieve all your recordings
Time Search tab
Search for footage recorded on a given day.
1. On the right-hand side, select the date to search, then press ‘Search’
2. Light blue bars indicate found recordings. Using the mouse, select a start time on the display,
or enter known time and date to view specic times
3. Press the play button to commence playback from the DVR to your monitor
Event Search tab
Search for motion events that the DVR has detected.
1. On the right-hand side, select the date to search, then press ‘Search’
2. A list of detected motion recordings will be shown. Double-click on an entry to commence
playback from the DVR to your monitor
Image tab
Search for images captured on the DVR.
1. On the right-hand side, enter the start and end times to search, then press ‘Search’
2. A list of image les will be shown. Double-click on a le to view
Advanced Settings
To Next Page
