What to do if Cocoon DVR6093 Security System remote control is not working?
If the remote control for your Cocoon Security System is not working, first, replace the batteries to ensure they are not flat. Second, make sure you are aiming the remote control at the front of the DVR unit.
What to do if Cocoon DVR6093 hard drive is full?
If your Cocoon Security System's hard drive is full, you can either format the hard drive or turn on the Overwrite feature. Setting Overwrite to Enable will overwrite the oldest footage first to ensure there is no down time.
How to stop Cocoon DVR6093 DVR from beeping?
To stop the DVR from beeping, turn off the audio beep by setting the Buzzer setting to OFF in the Alarm > Motion menu of your Cocoon Security System.
What to do if Cocoon DVR6093 has no picture?
If your Cocoon Security System shows no picture: * Check that the power is on and the Power LED is lit up. * Check the video cable is attached from the Video Output 1 on the back of the DVR to the yellow video input on your TV or monitor. * Set the TV or monitor to the correct video input channel. On most TVs, you can change inputs by pressing the button labeled source, input, A/V, channel 0, etc.
Why Cocoon DVR6093 Security System motion detection settings keep recording all night long?
If the motion detection settings of your Cocoon Security System are causing it to record all night long, try adjusting the sensitivity settings in the Alarm menu to a lower value.
What to do if Cocoon Security System has no power?
If your Cocoon Security System has no power, make sure the power adaptor is connected to the back of the DVR and the other end is plugged into a socket that is turned on.
Why are some Cocoon Security System camera images discoloured?
If some camera images from your Cocoon Security System are discoloured, try adjusting the colour settings in the display menu.
Why Cocoon DVR6093 night vision image is very bright?
If the night vision image on your Cocoon Security System is very bright and you can’t see anything when aimed out a window, either place the camera on the other side of the window or make sure the camera face is flush with the glass surface.
Provides an overview of the Cocoon Digital Video Security System.
Lists all items included in the DVR unit package.
Details the components and indicators on the front of the DVR unit.
Explains the various input/output ports on the rear of the DVR unit.
Guides on choosing an optimal location for the DVR unit.
Step-by-step instructions for connecting cameras and power.
Explains the functions of each button on the remote control.
Describes how to use the mouse to navigate DVR menus.
Steps to safely power on the DVR unit and its initial boot sequence.
Explains the initial split screen view after the DVR boots up.
Guides users on navigating through the DVR's menu system.
Accessing basic functions quickly via a popup menu.
How to correctly set the date and time for accurate recordings.
Accessing and navigating the main system menu of the DVR.
Adjusting display options like live view, output, and privacy zones.
Configuring recording modes, schedules, and stream settings.
How to find and play back recorded video events.
Settings for network connectivity, remote viewing, and DDNS.
Configuring motion detection areas, sensitivity, and alerts.
Managing hard drive, formatting, and PTZ camera settings.
Adjusting system time, language, user accounts, and firmware version.
Accessing advanced features like auto-reboots and firmware upgrades.
Steps to install the software needed to view recorded footage.
Instructions for playing back footage backed up to a USB drive.
Adjusting browser security settings for DVR client software installation.
How to access the DVR remotely using Internet Explorer or Safari.
Solutions for common problems encountered with the DVR unit.
Definitions of key terms used in the manual.
General| Brand | Cocoon |
|---|---|
| Model | DVR6093 |
| Category | Security System |
| Language | English |
To Next Page
