Code PHANTOM 1024 - Edit Chase

To Next Page

To Previous Page

Phantom_1024_V2.023_en.PDF http://www.codelight.com

6.5.2. Edit Chase

We will introduce how to edit and insert the Chase steps.

6.5.2.1. Edit Chase Step

 Press View + Playback button to find the Chase you need to edit;

 Press Edit Playback to enter “Program Playback” menu;

 Press the Playback button of the needed Chase;

 Use the fader under the chosen Playback button to find out the needed Chase step;

 Create the needed scene and Effect by manual control;

 Press S1 [Save Step];

 Press the corresponding Playback button of the step to cover the previous step program. For

example, we have create 4 Chase steps, and we need to edit the 3

step, so we press Playback

button 3, then the previously-saved program of the 3

step will be replaced.

6.5.2.2. Insert a step in Chase

 Press View + Playback button to view and select the needed Chase;

 Press Edit Playback to enter “Program Playback” menu;

 Press the Playback button of the needed Chase;

 Create the scene and Effects manually;

 Press S3 [Insert Step];

 Press the corresponding Number of the Playback button you want to insert. For instance, there

are 4 steps. You need to insert the present manual program between the 1

and 2

step. So, you

need to press Playback button 2, your present manual program will be saved as the 2

step.

The previous 2nd-4th step will move to 3rd-5th step. The inserted step temporarily shown with

a decimal point until you press Soft-key [Renumber Step].

6.5.2.3. Delete a Chase step

 Press View+ Playback button to look up the needed Chase;

 Press Edit Playback to enter “Program Playback” menu;

 Press the Playback button of the needed Chase;

 Press [Delete Step];

 Press the corresponding Playback button of the step you like to delete.