FILTERBREW & SERVING CONCEPT
7
CLEANING AND CARE
Disassemble the level tube and clean it
every week with the enclosed brush.
Take off the main lid and clean the mixer
tube(A).
Fill the serving station with hot water. ( Full
brewing without coffee and filter ).
Put 1 tablespoon with cleaning powder in the
serving station and wait at least 15 minutes.
Tap out 2/3 of the cleaning solution.
Clean the serving station with the cleaning brush.
Rinse the serving station with fresh tap water
several times before reuse.
Cleaning Serving station
Cleaning of Serving station
A
IMPORTANT!
Rinse the inside of
the serving station
several times with
fresh tap water.
Exterior cleaning
When cleaning exterior of the machine, use a soft rag with liquid cleaning agent
to prevent scratches.
OPTIONS
Part No. CLEANING PARTS
110102-02 Cleaning powder
1104231 Cleaning brush
1103360
Cleaning brush for level tube,
mixer tube
To Next Page
Loading...
