Coffee Queen A-2 - HVA;HVM Machine Programming

FILTERBREW & SERVING CONCEPT
16
Select machine type
Install the plug supplied in the inlet valve (E) to avoid possible
leakage.
Note
The display will show T1, change the type of machine with buttons (B) or (C).
T1 = HVA automatic
T2 = HVM manual
Conrm the choice by holding down the buttons (B) and (C) at the same
time for approximately 5 seconds.
Use a decanter to ll up the water tank to the long sensor pin.(A)
Keep button (B) pressed while turning on the power switch.(D)
PROGRAMMING
HVA/HVM
A
A
B
D
E
C