Operation Manual P750/P1500/P3000
Cold Jet, LLC Page 14
Safety Precautions
The Cold Jet P1500/P3000 is safe to operate. However, certain precautions must be taken
during use:
• NEVER OPERATE the unit without first reading the Operator Manual.
• NEVER operate the unit unless trained or authorized to do so.
• NEVER EXPOSE bare skin to CO
2
pellets or liquid.
• NEVER OPERATE without proper ear and eye protection.
• NEVER operate in a confined space without a ventilation system that maintains OSHA
CO
2
concentration levels (5,000 ppm).
• NEVER ATTEMPT to run the unit if it is damaged.
• ALWAYS disconnect the main power to the unit BEFORE performing maintenance
services.
• ALWAYS check gauges, when starting the unit, to verify the unit is working properly.
• DO NOT change pressure flow rate settings once they have been set.
• ALWAYS turn off the main power to the Pelletizer if it is to remain unused for an
extended time.
Hose Safety Precautions
• ALWAYS tighten hose fittings with a wrench.
• NEVER OPERATE equipment if the fittings have only been hand tightened.
• NEVER USE hoses above the recommended working pressure.
Electrical Safety Precautions
• UNLESS YOU ARE COLD JET TRAINED as a service technician, you should NEVER
attempt to work on the unit's electrical components.
• Do not operate equipment with electrical parts exposed.
• Do not operate equipment that has had safety circuits “jumpered” or rendered
inoperable.
• Follow the guidelines set forth in the governing codes of your local/national body as a
minimum standard for ensuring safety.
To Next Page
Loading...
