Cold Jet P1500 - Start-Up Procedure; Shut Down Procedure

Operation Manual P750/P1500/P3000
Cold Jet, LLC Page 8
Start-Up
1. Open the liquid CO
2
supply and vapor CO
2
supply valves.
2. Turn the Main Power switch [1] to the ON positon.
3. Verify the E-Stop button [3] is not depressed.
4. Turn the Chamber Power switches [2] to the OFF (O) position.
5. Press the Reset button [4].
6. Turn the Chamber Power switches [2] to the ON (I) position.
Shut Down
1. Turn the Chamber Power switches [2] to the OFF (O) position.
2. Turn the Main Power switch [1] to the OFF positon.
3. Close the liquid CO
2
and vapor CO
2
supply valves.