www.colorlightinside.com
16
⑥ Video Change: Enter the setting interface of “Video Change”, and press the
knob/OK to turn on/off the option of “By Take”. If “By Take” is in the closed status, you can
directly press the selection key of video source to switch the playing video; if “By Take” has
been turned on, you must continue pressing “Take” to switch the playing video after
pressing the selection key of video source.
6.3.2 EDID Setting
Rotate the knob to select EDID setting, then press the knob/OK to enter submenu of
“EDID Setting”.
Enter the EDID setting interface of “HDMI” or “DVI” or “VGA”. Rotate the knob to select
conventional resolution; or set width, height and frame rate by knob in the option of
“Custom”.
To Next Page
Loading...
