Colorlight X2 - User Manual

X2 Controller

Colorlight X2 Specifications

General

Category	Controller
Input Voltage	DC 5V
Control Method	USB/Ethernet
Dimensions	140mm * 92mm * 20mm
Type	LED Controller
Channels	8
DMX Channels	8
Operating Temperature	-20°C to 40°C
Humidity	10% to 90% (non-condensing)

Summary

1. Overview

Key Features of X2 Controller

Details the professional LED display controller's capabilities, including input resolutions, loading capacity, and connectivity.

2. Appearance

Front Panel Description

Details the components and indicators visible on the front panel of the X2 controller.

Back Panel and Interface Ports

Describes the back panel layout and details the input, output, and controlling interface ports on the X2 controller.

3. Signal Connection

4. LEDVISION Installation

5. Parameter Configuration

5.1 Detect Sender and Receiving Card

Guides on using LEDVISION to detect the sender and all connected receiving cards for proper configuration.

Sending Device: Signal Source

Configure signal source selection within the sending device settings.

Sending Device: Scaling and Clipping

Explains how to scale and clip images within the LEDVISION software for display optimization.

Sending Device: EDID Setting

Covers setting the sender resolution using EDID, including selecting conventional resolutions or custom settings.

Sending Device: Advanced Settings and Detection

Details advanced parameters, test modes, and how to detect receiving cards connected to the sender.

5.2.2 Screen Parameters Setting

Configures module information, scan modes, box settings, and performance parameters like refresh rate and gray level.

5.2.3 Connection Parameters Setting

Guides on setting receiving card quantity, mapping, and connection lines for the display.

Receiving Card Parameter Setup

Details methods for setting receiving card parameters and connection lines using mouse or standard connection lines.

Save Configuration to Receivers

Explains how to send and save the configured parameters and connection lines to the receiving cards.

6. LCD Operation Instruction

6.1 Operational Motion Instruction

Explains the basic operations using the knob/OK button and ESC key for menu navigation and parameter adjustment.

6.2 Main Interface

Details the information displayed on the main interface of the X2 controller's LCD screen.

6.3 Operation Instruction

Provides access to 8 detailed operation menus for controller functions.

6.3.1 Display Setting

Covers adjusting brightness, color temperature (CCT), black screen, better gray, test mode, and video change.

6.3.2 EDID Setting

Explains how to configure EDID settings for HDMI, DVI, and VGA inputs, including resolution and custom parameters.

6.3.3 Input Setting

Details input settings, focusing on enabling/disabling VGA/CVBS and preference for signal input.

6.3.4 Input Clip Setting

Guides on clipping input signals for HDMI, DVI, SDI, VGA, and CVBS by setting X, Y, width, and height.

6.3.5 Output Setting

Covers output settings, allowing adjustment of X, Y, width, and height for the main output.

6.3.6 Output Shift

Explains output shift options, 'Whole' and 'By Port', for adjusting image position.

6.3.7 Language Setting

Allows users to select the display language for the controller interface.

6.3.8 System Setting

Provides options for setting date/time, restoring factory settings, and checking firmware version.