Colorlight X2 User Manual

www.colorlightinside.com
11
each sender, and the software will auto calculate and set up the port control area according
to the connection relationship.
Detailed setting steps as follows:
① Set up the quantity of receiving card
Set how many receiver (receiving card) that one port manages in Row Count and Col
Count (6*3 as an example) according to the actual loading of LED display, you will see LED
display mapping area from the right side (Viewing from the front of LED display).
② Receiving Card Parameters Setting
Select the target sender and the net port from the left side, then select the
corresponding cabinets within net port actual control area and set the connection lines in
the mapping area.

Colorlight X2 Specifications

General

Brand	Colorlight
Model	X2
Category	Controller
Language	English