IS-NT-Async-SPI, SW Version 1.2, ©ComAp – February 2011
IS-NT-Async-SPI-1.2.PDF
5
General description
Description of the controller system (with all options)
NT Family controllers are comprehensive AMF-controllers for single and multiple generating sets operating
in stand-by or parallel modes. A modular construction allow upgrades to different levels of complexity in
order to provide the best solution for various customer applications.
NT Family controllers are equipped with a powerful graphic display showing icons, symbols and bar-graphs
for intuitive operation, which sets, together with high functionality, new standards in Gen-set controls.
The controller automatically starts the gen-set, closes the Gen-set C.B. when all conditions are met, then
stops the engine on external signal or by pressing push buttons.
Parallel to the Mains operation is a standard feature. Isolated parallel and Power Management System
support are optional. Forward and reverse synchronizing, Generator protections, Mains protection including
vector shift, load and power factor control are the major functions provided. Interfacing to foreign
synchronizers and load sharers is supported.
The key feature of the controller is its easy-to-use operation and installation. Predefined configurations for
typical applications are available as well as user-defined configurations for special applications.
Available related documentation
PDF files Description
IGS-NT-2.4-Application guide.pdf Application guide for IG/IS-NT
IGS-NT-2.5-Installation guide.pdf Installation guide for IG/IS-NT
IGS-NT-2.0-Operator guide.pdf Operator guide for IG/IS-NT
IGS-NT-BB Communication Guide 01-2011 Communications guide for IG/IS-NT(C)-BB controllers
IG/IS-NT Communication Guide 12-2009 Communication guide for IG/IS-NT controllers
To Next Page
Loading...
