ComAp IG-NTC GC - Page 143

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
143
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 14
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #14. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 15
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #15. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Setpoint: Timer channel 16
Group
Timer settings
Range [units]
[-]
Related FW
3.0
Description
This setpoint adjusts the mode of the Timer channel #16. Output from this channel
is available in the combined output TimerAct 13-16.
NOTE:
See the chapter Timers for more details about timers.
Group: Act. calls/SMS
Setpoint: History record
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0