ComAp IG-NTC GC User Manual

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
145
possible
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as Off load occurs. See the chapter Alarm management
for more information about protection types.
NOTE:
As the Off load protection does not appear in the alarmlist, the SMS or e-mail may
contain empty alarmlist.
Setpoint: BrkOpen&CoolDn
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
BrkOpen&CoolDn-type alarm occurs. See the chapter Alarm management for
more information about protection types.
Setpoint: Mains protect
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES
Force value
possible
YES
Description
This setpoint is used to enable sending SMS and/or e-mail alerts when a
"protection" configured as Mains protect occurs. See the chapter Alarm
management for more information about protection types.
NOTE:
As the Mains protect protection does not appear in the alarmlist, the SMS or e-
mail may contain empty alarmlist.
Setpoint: Slow stop
Group
Act. calls/SMS
Range [units]
DISABLED, ENABLED [-]
Related FW
3.0
Force value
possible
YES

ComAp IG-NTC GC Specifications

General

Brand	ComAp
Model	IG-NTC GC
Category	Controller
Language	English