ComAp InteliGen - Page 29

Change of the Numerical Value
Use
→
,
←
buttons to go to a certain position of the field and use
↑
↓
to change the
value. Then confirm your settings with Enter button.
Hint:
If the value is out of limit, the field will color red and the value could not be confirmed.
String Selection
Use
↑
↓
to go to a certain setpoint and press Enter, see picture below:
Actual setpoint value
Cursor position
Min. value
Edited setpoint
Actual setpoint value
Max. value
Administrator signed in
InteliVision 5, InteliVision 8 – Operator guide, ©ComAp – January 2014
IGS-NT Operator Guide 01-2014.pdf
29